CE Certified Polypropylene PP Mesh Fiber for Concrete

Product Description 

Polypropylene chopped Fiber (PPMF) is a high-strength bundled monofilament fiber made of polypropylene resin as the primary raw material by a unique process. Adding it to concrete (or mortar) can effectively control micro-cracks caused by plastic shrinkage, settlement, and temperature changes in concrete (or dry mortar) and prevent and inhibit the formation and development of cracks. As a result, it can be widely used in industrial and civil construction, water conservancy engineering, road, and bridge engineering.

Santo Chemical Limited has been in the producing and exporting chemicals industrial grade for many years, we use high water reduction rate Polycarboxylate Superplasticizer 

for concrete mixing plant, this is a quite important and popular Concrete Admixtures, we have very good advantages for both quality and prices;

Besides this, we are also doing other chemicals in different applications, such as Sodium Carboxymethyl Celluose, it could be used as food additives, oil drilling, papermaking, 

and daily use.

Welcome to inquiry our products!

Product Characteristics 

⦁ There will be no conflict between concrete with fiber and concrete aggregate, admixture, and cement, and there is no special requirement for mixing equipment.
⦁ PPMF is easy to use. Therefore, it is unnecessary to change the original design ratio of concrete, the reinforcement ratio in the original design, or reduce the primary stress reinforcement in the structure at will.
⦁ Accurately weigh the fiber according to the designed dosage and concrete mixing volume. After preparing the sand and gravel, add the fiber and the aggregate to the mixer. It should appropriately extend the mixing time to 30-60 seconds. Random sampling after the blending is completed; if the fibers have been evenly dispersed, it can put the concrete into use. If there are still bundled fibers, prolong the stirring time for 30 seconds, and then it can be used.
⦁ The construction and maintenance process of concrete with PPMF is the same as that of ordinary concrete.

Typical Spec

Mainly Application

1. The surface of concrete roads and bridges, factory grades, airport pavements, etc;

2. The walls and roofs of tunnels and mines;

3. The riverways, dams, tanks, etc;

4. The piers, quay revetments, defending projects for military affairs;